General Specification (approx) | |
Size (cm) | 410 x 180 x 540mm |
Weight (kg) | 18kg |
Oil Mist Output | 0 - 850mg/sec |
Power | 2200w |
Power Supply | 110/120v 50/60hz 20A 220/240v 50hz 10A |
Heat up time | 6.5min |
The oil mist media is stored in the OMG in a heated pressure tank, the temperature of which can be controlled to ensure a consistent and appropriate oil viscosity. Temperature control of the reservoir is via it's own PID microprocessor controller, allowing independent control from ambient to 70°C.
The heat exchanger within the OMG is controlled by a second programmable microprocessor controller, the parameters of which can be adjusted to suit the specific physical properties of the oil in question. The high watt density cartridge heaters within the heat exchanger are controlled via a solid state relay, which proportionally bursts power to the heat exchanger to maintain optimum response time with minimum overshoot.
Oil mist can be produced above a minimum temperature alarm value, which can also be adjusted to suit the physical properties of the test oil. Once this state is achieved, oil mist is produced by pressurising the integral oil tank with an inert carrier gas.
A mixture of oil and inert gas is then passed through the precision, machine heat exchanger chamber. The oil is vapourised, and the resulting vapour condenses on exiting the heat exchanger to form a dense, controllable oil mist / fog.
As with all of Concept's mains powered smoke systems, a class leading warranty is provided.
The precision machined heat exchanger has a self purge system that initiates automatically after every operation, meaning that virtually no residue is left in the heat exchanger to carbon which would eventually lead to a blockage within the chamber.
The picture opposite shows the heated fluid reservoir that comes as standard with the Concept Oil Mist Generator.
Oil mist from the OMG can be passed through flexible ducting if required using optional ducting adaptors ( 25mm, 50mm and 75mm available), or alternatively an extended nozzle can be fitted to allow entry into a pressurised system.
Concept Smoke Oil mist has been extensively tested by independent bodies, including the Health and Safety Executive to ensure that it is non toxic and non flammable, Copies of the Health and Safety Data Pack are available on request. However, risk assessments should be carried out prior to the use of other "oils types" through the OMG.
Supplied with:
Want more information, advice or prices? email us: info@conceptsmoke.com
.
scroll through the slides,
click on a thumnail and
view the movies
Concept Smoke Systems are one of the leading smoke machine manufacturers... Read more >
Concept are pleased to be exhibiting and supporting the Emergency Servic... Read more >
> view allWe are manufacturers of all types of Fire Training Equipment i.e. Fire Houses, Aircraft, Ships etc and use the Concept range of Smoke Heads and Smoke Machines, in particular the ViCount 5000, over the last 15 years.
We use the oil based smoke system which produces smoke that will not dissipate when subjected to heat unlike water based smoke systems.
The Concept units have proven to be very reliable and robust when operated and maintained in accordance with Concept operating and maintenance instructions.
We have installed around 500 units some of which have been in service since being installed 15 years ago.
We have found Concept Engineering: